Yes, but it must be a wireless mic set with a receiver. Connect the receiver via the ¼'' AUX jack on the machine, then you can use the original mic and the second mic at the same time. You can also connect a wired mic directly.
How can I make the mic work?
Firstly, the mic requires 2pcs AA batteries (not included). Install the batteries and just turn on the microphone to use. You don’t need to pair it with the speaker.
How to turn off the echo?
Press the "Echo" button to select the intensity of the reverb, "EC0" is off and "EC3" is the strongest.
Why is my microphone making a static sound?
Check the batteries. If the microphone is in a low battery, it will make a static sound. Please replace the batteries. And please keep the microphone far away from the speaker during use.
How to use the provided microphone correctly?
Since the microphone is unidirectional, for better and clearer pickup, please keep your lips 45 degrees in front of the microphone within 1~2 inches. Exceeding 2 inches may affect the pick up effect and even couldn't pick up any sound.
Can it connect more than one Bluetooth device at the same time?
No, only one Bluetooth device at a time
Can the speaker be connected to a computer through an AUX cable?
Yes, there is an AUX jack for non-Bluetooth devices connectivity.
Why can't I record the voice?
Before recording, make sure that your USB flash drive or TF card has sufficient recording storage space. And make sure there is at least one song in the TF card or USB flash drive, otherwise, the recording function will not work. Please turn on the microphone before pressing the “REC” button, or the recording function will not work. The capacity of the USB flash drive or TF card must be 8G to 32G. The file system must be FAT32. If it is formatted and the file system is not FAT32, it will not work properly.
Why can’t the music be recorded?
As for the recording function, it can only record your voice from the microphone, the background music will stop during recording.
How to set the FM radio?
Press the "Mode" button to switch to FM mode. Press and hold the "Play/Pause" button to automatically search for FM stations. The stations will be saved automatically. Stop searching stations by pressing the "Play/Pause" button again. The FM range is 87.5-108.0MHz.
Can I hook this to a smart TV instead of a phone?
No, it’s not suggested to connect the speaker with a smart TV. The music will become choppy.
How to update the volume system of T29?
Since the T29 is designed as an outdoor karaoke speaker, the volume is larger than normal speakers. You can get a much suitable volume system for indoor use by updating the volume system. Here are the steps:
→Unzip the file and copy the document named "updata" to your USB flash drive.
→Do not copy the zipped file or the folder directly to the USB flash drive, or the machine cannot recognize it.
→When the machine is powered off, insert the USB flash drive via the USB flash drive slot, and then power on the machine.
→After a beep, it means that it’s updated successfully.
→Wait for 3~5s, power off the machine, and then unplug the USB flash drive. →Power on the machine again, check if the volume control system is updated successfully.
→If there is no change in the volume control, please try again by the above steps.
→Please delete the document in the USB flash drive after update, otherwise it won't work if you want to listen to music via USB flash drive.
How often should I charge the speaker?
Please charge for more than 6H for the first time. If the speaker isn’t in use for a long time, please charge it periodically, otherwise the battery will be damaged. It's suggested to charge the speaker after each use.
How to turn off the lights of T12 speaker?
Power on the speaker, the LED light will be default on. Slide the power switch to the middle position, the LED light will be turned off.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
